Puluk Pro Wave Set lash lift kit

Pro Wave lash lift set

The set delivers not only a luxurious, fast result but also deep nourishment. Ideal for thin and weakened lashes.

The Strong kit features an adhesive with a stronger hold.

In the Light kit, the adhesive sets slightly more slowly and gently.

Benefits:

• Minimal fragrance: formulas 1 and 2 have a faint smell thanks to a reduced amount of thioglycolate
• Saves time and money
• Fast-acting formulas
• One tube is enough for 65-70 procedures
• Suitable for sensitive eyes
• The formulas do not cause watering when working with sensitive eyes.
• Safe and convenient
• The packaging shape prevents oxidation

Instructions for using the PULUK Pro Wave lash lift kit

1. 1. Remove make-up and impurities from the eyelids and lashes using lash foam or micellar water.
2. 2. Isolate the lower lashes with hydrogel eye patches.
3. Apply cleanser to a microbrush and thoroughly treat the natural lashes to remove any residue of cosmetics, dust, protein and oil.
4. 4. Choose the pad size that matches the length of the client's lashes.
5. 5. Stick the pads on with the fixing gel (adhesive) as close as possible to the root zone of the lashes, placing the pads from the inner corner of the eye to the outer corner and slightly pulling the eyelid skin towards you.
6. 6. Apply fixing gel to the pads and, using the applicator (multifunctional), lay the lashes onto the pad parallel to each other, without crossing.
7. 7. Apply Solution No. 1 to the lashes in an even, thin layer, leaving 2 mm from the roots and tips. Processing time: 10-15 minutes (depending on the density of the natural lashes). If the solution is absorbed during processing, add more. When the time is up, remove any residue of the solution with a dry cotton bud.
8. 8. After removing Solution No. 1, apply Solution No. 2 to the same area in an even, thin layer, leaving 2 mm from the roots and tips of the lashes.

Processing time: 10-15 minutes (the same as for Solution No. 1).
When the time is up, remove any residue of the solution with a dry cotton bud.

1. 9. If you plan to tint the lashes or add extra care with the strengthening balm for lashes and brows  or the restoring serum for lashes and brows during the procedure, apply these products after removing Solution No. 2. If you plan both tinting and extra care, first apply the tint to the lashes, remove it with a dry cotton bud and then use the balm or serum.
2. 10. After removing Solution No. 2 (lash tint / strengthening balm / restoring serum – if used), apply Solution No. 3 to the lashes.

Apply Solution No. 3 in small sections, and remove any residual gel and solutions with a clean microbrush or a dry cotton bud, separating the lashes from the pad.

1. 11. Remove the pads. For easy removal, use a cotton bud slightly moistened with water: lift the pad at the outer corner of the eye, place the cotton bud under it and, rolling it slightly, move towards the inner corner.
2. 12. Use a cotton bud moistened with water to remove any residue of the products and fixing gel from the eyelid.

Kit contents:

• Solution No. 1 for PULUK Pro Wave lash lift, 7 g
• Solution No. 2 for PULUK Pro Wave lash lift, 7 g
• Solution No. 3 for PULUK Pro Wave lash lift, 7 g
• Fixing gel, 5 g
• SOFT silicone pad set (5 pairs: XS, S, M, L, XL)
• Multifunctional applicator for lash lift and lash perming.

Shelf life: Solutions No. 1, 2 – 3 years from the date of manufacture, 6 months after opening. Solution No. 3 – 2 years from the date of manufacture, 6 months after opening. Fixing gel – 1 year from the date of manufacture, 3 months after opening.